#shipmaintenance #marinesurveys #shipinspections #shiprepair #vesselinspections #shipyard #drydock #shipsafety #maritimesurveying #hullinspections #shipclassification #surveyors #marineengineering #shipmanagement #maritimeindustry #shipoperations #seafarers #navalarchitecture #vesselsurveys The classification activity of the Russian Maritime Register of Shipping (hereinafter referred to as "the Register, RS") is carried out in accordance with the General Regulations for the Classification and Other Activity. Classification surveys of ships and offshore installations in service are regulated by the Rules for the Classification Surveys of Ships in Service, the Guidelines for the Technical Supervision of Ships in Service, the Rules for the Surveys of Inland Navigation Ships in Service (for European Inland Waterways) and other RS rules depending on the type of ship and offshore installation. The aim of the initial survey of a ship in service shall determine whether it is possible to assign class to a ship being submitted for the Register classification for the first time, as well as to re-assign the RS class to the ship whose RS class was withdrawn. A written application on acceptance of a ship into the RS class (in arbitrary form) is sent by the shipowner to the Register. Periodical surveys: Annual survey for class confirmation is intended for establishing that the ship complies to a sufficient degree with the conditions of class, as well as for checking the operation of machinery, devices and installations covered by the requirements of the Rules for the Classification and Construction of Sea-Going Ships. Intermediate survey shall be carried out either at or between the second and third annual surveys. Items, which are additional to the items to be surveyed at annual surveys, may be surveyed either at or between the second and third annual survey. Special survey for class renewal is intended for determining whether the ship's technical condition and structural and composition modifications of its items comply with the requirements of the RS rules. Special survey shall be carried out at 5-year intervals to renew the class. Survey of the outside of the ship's bottom shall be carried out to verify whether the technical condition of the following items complies with the requirements of the RS rules: underwater hull; Continuous survey system (CSS) of a ship: hull, arrangements, machinery, electrical equipment, refrigerating plant. Continuous survey consists of the distribution of survey scope corresponding to the scope of special survey for class renewal between separate surveys, and the whole cycle of survey shall be conducted within the period, for which the class is assigned or renewed. Survey on a Planned Maintenance Scheme for Machinery (PMS) basis shall be carried out on the basis of intervals between the maintenance operations (overhauls) recommended by the manufacturer, documented operator's experience and a condition monitoring system, where fitted. Survey on a Condition Monitoring (CM) and a Condition Based Maintenance (CBM) basis. CM and CBM systems are fitted on board the ship at the shipowner's discretion and shall be approved and subject to the relevant surveys performed by the Register upon the shipowner's written request. Occasional surveys shall be carried out in connection with reinstatement/retainment of class; changing of class notation, type/subtype and ship's other characteristics; emergency occurrences; passages. Other surveys. Subject to special agreement and authorization, the Register may carry out other surveys, such as: surveys carried out on authorization of state authorities (MA, embassy of Flag State, standardization bodies, state technical supervisory bodies, etc.); surveys carried out at the request of companies (shipping, insurance, industrial and others). ship inspection procedure, ship inspection, cargo ship inspection, dry dock inspection, inspection engineer, ship hull inspector, immersion suit inspection, how inspection is done, inspection ma, inside supply vessel, inspections, inspection express tutorial, inspection usar, inspection for industry, navy room inspection, non intrusive inspection, how an inspection is properly conducted, ship hull inspection, underwater inspection of ships, u boat inspect ship, vessel inspection, vessel inspection procedure, vessel work, vessel safety inspection, uwild inspection, working in a shipyard, inspection system, yacht inspection, inspection express, stabistor inspection, inspection analysis, 4 point inspection, central priming system in ships

• published: 05 Apr 2023
• views: 2068